Maintenance Cycle Of Filling Machine

Jan 06, 2025

Leave a message

The maintenance cycle of filling machine may vary according to different types of filling machines. Here are some common maintenance cycle recommendations:

Monthly maintenance:

Check the intake filter and exhaust filter.
Check the oil level and color, add or replace if necessary.

Quarterly maintenance:

Clean the oil and other debris in the main box.

Semi-annual maintenance:

Clean the dust and dirt in the vacuum pump cavity.
Clean the fan hood, fan wheel, ventilation grille, cooling fins.
Replace the exhaust filter, clean or replace the intake filter.

Annual maintenance:

Replace the vacuum pump oil and oil filter.
Replace the lubricating oil (grease) of the reducer motor.
In addition, the maintenance cycle of specific components or functions may be different:

1000L IBC tonnage lactic acid filling machine: The filling head should be cleaned at least once a week.

Electrical system: The inspection frequency is once a month.
‌Specific steps and methods for maintenance‌ include:

‌Check the vacuum pump‌: Make sure the vacuum pump oil is shiny and clear, without foam or turbidity. If there is a milky white substance that does not disappear after the oil settles, it means that foreign matter has entered and new oil must be replaced‌.
‌Cleaning the vacuum pump cavity‌: Use compressed air to clean the dust and dirt in the pump cavity, clean the fan engine cover, fan wheel, ventilation grille, and cooling fins‌.
‌Replace the filter‌: Replace the vacuum pump oil and oil filter every 500 to 2000 hours‌.
‌Cleaning and maintenance‌: Clean the scale regularly, check whether the pneumatic pipeline has leaks or ruptures, and keep the machine surface and electrical control cabinet clean‌.

Send Inquiry